fphe vendors

For discussing the modifications needed for diesel vehicles to run with 2 tank veggie oil conversions.

Moderators: SunWizard, coachgeo

fphe vendors

Postby sacveggieguy » Mon Sep 22, 2008 4:48 pm

Hi to all ,

Im looking for pricing and vendors. Anyone who can recomend good units and pricing.

Thanks Paul aka Sacveggieguy
To Dare Is To Do
Posts: 93
Joined: Thu Mar 06, 2008 12:21 am
Location: Elk Grove

Postby SunWizard » Mon Sep 22, 2008 6:43 pm

See the sticky post at the top of this forum.
YVORMV - Your veg. oil results may vary.
95 Dodge Cummins 4x4 SVO WVO conversion.
81 Mercedes 300D- stock and happy on V80/D20 blend.
Low fossil net zero house- 100% solar power and heat.
Site Admin
Posts: 1724
Joined: Mon Dec 11, 2006 2:53 pm
Location: N. Colorado

Postby 240Volvo » Mon Sep 22, 2008 6:50 pm

1984 Volvo 240 diesel with a single tank Elsbett conversion: electric fuel filter heater, FPHE, glow plugs, and injectors. Also injector line heaters and block heater, running 20%kero/80%WVO winter blend.
Posts: 127
Joined: Thu Mar 06, 2008 8:34 am
Location: New Jersey

we have fphe (flat plat heat exchangers) in stock.

Postby omar » Fri Sep 26, 2008 11:55 am

we have fphe (flat plat heat exchangers) in stock
16.26,30,40 plate or larger copper or nickel brazed. SUS 316 Stainless Steel Plates
Certificate of qualification for ISO 9001:2000, UL and CE

anyway have fun ... here are a few more links you should read if you have time...

Flat Plate Heat Exchanger (FPHE) installs

http://biodiesel.infopop.cc/eve/forums/ ... 6421006031

wvo filter bag ideas and waste veggie oil filtering http://biodiesel.infopop.cc/eve/forums/ ... 6961060812

heated waste oil filter ideas http://biodiesel.infopop.cc/eve/forums/ ... 7521042961

wvo (waste veggie oil) tank ideas http://biodiesel.infopop.cc/eve/forums/ ... 7591014102

One more thing--these Heat Exchangers come with Threads: 1/2" Female NPT for easy install. 26 Plate Flat Plate Heat exchanger, SUS 316 Stainless Steel Plates, Pure copper brazing, under vacuum, Max Temp 392F (200C) Max Pressure 435 psi (30 bar),Dimensions: 7.5" x 3" x 2.5" inches Brazed type heat exchanger consists a series of thin and corrugated stainless steel plates. These plates are compressed and brazed together with copper or nickel depending on the application. This creates flowing channels between plates, with one fluid in odd number channels and the other in the even number channels, thus reaching the purpose of heat exchanging. Different from the gasket seal type, brazing type uses soldering material (copper or nickel depending on the application) to seal the exchanger. By applying high temperature in the vacuum environment at the manufacturing process, it melts down the soldering material to form the seal between each plate.
Posts: 40
Joined: Sun Mar 23, 2008 5:36 pm
Location: WA.

Postby John Galt » Fri Sep 26, 2008 12:28 pm

John Galt
Posts: 526
Joined: Tue Mar 04, 2008 9:17 pm
Location: Coldest North America

Return to 2 Tank veggie oil conversion and General discussion

Who is online

Users browsing this forum: No registered users and 0 guests