junk settled after cf/

Collecting, filtering and dewatering of WVO SVO vegetable oil. For Biodiesel producers too.

Moderators: SunWizard, coachgeo

junk settled after cf/

Postby gary » Thu Feb 12, 2009 8:37 am

I followed the standard cf parameters and because I went through polishing filters prematurely in the past, and I dont haVE A CONE BOTTOM DRUM, i LEFT THE LAST 2-3 GALLONS BEHIND IN THE 55GAL BARREL. THE NEXT DAY THE OIL LOOKS SUPER CLEAR BUT THERE IS fine BLACK SETTLed junk on the bottom...When I reach down in the barrel with a large spoon and srape the stuff it just settles...it does not mix up...any thoughts?
gary
 
Posts: 102
Joined: Tue Jun 24, 2008 4:27 pm

Postby SunWizard » Thu Feb 12, 2009 11:16 am

Its probably particles that settled while you were running the CF, I get that too.

If you go through polishing filters, you need to run the CF longer, or only polish with the VO hot since PHO/fats will clog them.
YVORMV - Your veg. oil results may vary.
95 Dodge Cummins 4x4 SVO WVO conversion.
81 Mercedes 300D- stock and happy on V80/D20 blend.
Low fossil net zero house- 100% solar power and heat.
SunWizard
Site Admin
 
Posts: 1720
Joined: Mon Dec 11, 2006 2:53 pm
Location: N. Colorado


Return to Vegetable oil Collecting, Filtering and Dewatering

Who is online

Users browsing this forum: No registered users and 0 guests

cron